Rivet correct installation method

Update:27 Jul 2019
Summary:

The correct installation method for the rivet: 1. With […]

The correct installation method for the rivet:
1. With a base installation
1. On the leather surface, punch with a 3MM punch from the front:
2. Place the rivet spikes on the base:
3. Pin the leather sleeve:
4. Put a short cap on the leather:
5. Use a rivet mold to align the short cap and hammer the mold with a hammer. It is best to get it in place and have a lot of strength.
2. Demonstrate a method for installing a thick skin:
1. On the leather surface, punch with a 3MM punch from the front:
2. Place the rivet on a thicker piece of leather (if there is a hard skin, it is a better choice)
3. Put the leather on the spike:
4. Install the rivet cap:
5. Align the short cap with a rivet mold and hit the mold with a hammer. It is best to put it in place and make it stronger.
3. The installation method of the padding plate below:
1. On the leather surface, punch with a 3MM punch from the front:
2. Place the long nails of the rivets on the punching plate:
3. Pin the leather sleeve:
4. Put a short cap on the leather
5. Use a rivet mold to align the short cap and hammer the mold with a hammer. It is best to get it in place and have a lot of strength.